GRATIS VERSAND ab 150 Euro (Deutschland / Österreich)

99,8 % positiv auf eBay · 1.410 Bewertungen in 12 Monaten

Pinarello Prince frame in 61.5 cm (c-t) 57 cm (c-c) with Aluminium and Carbon tubing Pinarello Prince frame in 61.5 cm (c-t) 57 cm (c-c) with Aluminium and Carbon tubing

BrandMarke: Pinarello

ConditionZustand: Vintage (used)Vintage (gebraucht)

  • Previously mounted. Wear and any flaws are stated in the listing and visible in the photos.Bereits montiert gewesen. Gebrauchsspuren und etwaige Mängel sind in der Beschreibung angegeben und auf den Fotos zu sehen.

This part has already been sold.Dieses Teil ist bereits verkauft.

Looking for exactly this part? Send us a search request and we'll keep an eye out through our contacts and sources. The search service is available to our customers and newsletter subscribers.Du suchst genau dieses Teil? Stell einen Suchauftrag – wir halten über unsere Kontakte und Quellen danach Ausschau. Der Suchservice steht unseren Kunden und Newsletter-Abonnenten offen.

Send a search requestSuchauftrag stellen

99,8 % positive Bewertungen von 1.410 eBay-Käufern (12 Monate) · Alle ansehen 99.8 % positive feedback from 1,410 eBay buyers (12 months) · See all

Sorry, this item is out of stock. All our vintage parts are unique items and our NOS items also have limited stock. Be sure to check out our huge inventory of vintage items and NOS - New Old Stock items and our ever growing assortment of frames. We are constantly adding new items. In the meantime also signup to our newsletter in the footer of the page
--------------

Sattelrohr / seat tube: 61.5 cm (Mitte-Oberkante / center-top)
Sattelrohr / seat tube 57.0 cm (Mitte-Mitte / center-center)
Oberrohr / top tube: 57.0 cm (Mitte-Mitte / center-center)
Steuerrohr / head tube: 18.3 cm
Gabelschaft / fork shaft: 26.2 cm

Einbaubreite vorne / front spacing: 100 mm
Einbaubreite hinten / rear spacing: 130 mm

Sattelstütze / seat post: 30.8 mm

Innenlager / bottom bracket: ITA (70 mm)

Rohrsatz / tubeset: Frame: Aluminium with carbon fiber seatstays
Fork: Pinarello carbon fiber

Ausfallenden / dropouts: -

Gewicht / weight: 2.340 kg (with Headset / Bottom Bracket and Seat-clamp)

Bemerkung / please note:
Frame comes with Pinarello seat-clamp and headset (bearings run ok with resistance) also a titan bottom bracket (runs good and smooth) | we do not have the proper tools to remove these parts so we leave them on the frame | someone tryed to remove the decals on the down tube (drive-side) with sandpaper | see pictures!
Rahmen kommt mit Pinarello Sitzklemme und Steuersatz (Kugellager laufen ok mit wiederstand), außerdem mit einem Titan Innenlager (läuft gut und weich) | wir haben nicht die richtigen Werkzeuge um die Teile auszubauen deswegen verbleiben sie am Rahmen | jemand hat versucht die Sticker am Unterrohr (Antriebseite) mit Schleifpapier zu entfernen | siehe Bilder!

Zustand: technisch OK / optischer Zustand: siehe Fotos
Condition: technically ok / visual condition: see pictures

Sattelrohr / seat tube: 61.5 cm (Mitte-Oberkante / center-top)
Sattelrohr / seat tube 57.0 cm (Mitte-Mitte / center-center)
Oberrohr / top tube: 57.0 cm (Mitte-Mitte / center-center)
Steuerrohr / head tube: 18.3 cm
Gabelschaft / fork shaft: 26.2 cm

Einbaubreite vorne / front spacing: 100 mm
Einbaubreite hinten / rear spacing: 130 mm

Sattelstütze / seat post: 30.8 mm

Innenlager / bottom bracket: ITA (70 mm)

Rohrsatz / tubeset: Frame: Aluminium with carbon fiber seatstays
Fork: Pinarello carbon fiber

Ausfallenden / dropouts: -

Gewicht / weight: 2.340 kg (with Headset / Bottom Bracket and Seat-clamp)

Bemerkung / please note:
Frame comes with Pinarello seat-clamp and headset (bearings run ok with resistance) also a titan bottom bracket (runs good and smooth) | we do not have the proper tools to remove these parts so we leave them on the frame | someone tryed to remove the decals on the down tube (drive-side) with sandpaper | see pictures!
Rahmen kommt mit Pinarello Sitzklemme und Steuersatz (Kugellager laufen ok mit wiederstand), außerdem mit einem Titan Innenlager (läuft gut und weich) | wir haben nicht die richtigen Werkzeuge um die Teile auszubauen deswegen verbleiben sie am Rahmen | jemand hat versucht die Sticker am Unterrohr (Antriebseite) mit Schleifpapier zu entfernen | siehe Bilder!

Zustand: technisch OK / optischer Zustand: siehe Fotos
Condition: technically ok / visual condition: see pictures

Recently Viewed Products

Zuletzt angesehene Produkte