Basso Astra frame 60 cm (c-t) / 58.5 cm (c-c) Columbus EL tubing Basso Astra frame 60 cm (c-t) / 58.5 cm (c-c) Columbus EL tubing
Previous NextBasso
--------------
Sattelrohr / seat tube: 60.0 cm (Mitte-Oberkante / center-top)
Sattelrohr / seat tube 58.5 cm (Mitte-Mitte / center-center)
Oberrohr / top tube: 57.0 cm (Mitte-Mitte / center-center)
Steuerrohr / head tube: 15.7 cm
Gabelschaft / fork shaft: 19.5 cm
Einbaubreite vorne / front spacing: 100 mm
Einbaubreite hinten / rear spacing: 126 mm
Sattelstütze / seat post: 27.2 mm
Innenlager / bottom bracket: ITA (70 mm)
Rohrsatz / tubeset: Columbus EL
Ausfallenden / dropouts: Frame: Basso / Fork: Basso
Gewicht / weight: 2.920 kg
Bemerkung / please note:
Down tube has a dent on the right side next to the letter "A" | between the bottle cage mounting holes is a small oblong dent | crown race grinded down to around 26.1 - 26.2 mm | see pictures!
Unterrohr hat ein Delle auf der rechten Seite, gleich beim Buchstaben "A" | zwischen den Flaschenhalter Montagelöchern ist eine kleine längliche Delle | Gabelkonus wurde runtergefeilt auf 26.1 - 26.2 mm | siehe Bilder!
Zustand: technisch okey / optischer Zustand: siehe Fotos
Condition: technically okey / visual condition: see pictures
Sattelrohr / seat tube: 60.0 cm (Mitte-Oberkante / center-top)
Sattelrohr / seat tube 58.5 cm (Mitte-Mitte / center-center)
Oberrohr / top tube: 57.0 cm (Mitte-Mitte / center-center)
Steuerrohr / head tube: 15.7 cm
Gabelschaft / fork shaft: 19.5 cm
Einbaubreite vorne / front spacing: 100 mm
Einbaubreite hinten / rear spacing: 126 mm
Sattelstütze / seat post: 27.2 mm
Innenlager / bottom bracket: ITA (70 mm)
Rohrsatz / tubeset: Columbus EL
Ausfallenden / dropouts: Frame: Basso / Fork: Basso
Gewicht / weight: 2.920 kg
Bemerkung / please note:
Down tube has a dent on the right side next to the letter "A" | between the bottle cage mounting holes is a small oblong dent | crown race grinded down to around 26.1 - 26.2 mm | see pictures!
Unterrohr hat ein Delle auf der rechten Seite, gleich beim Buchstaben "A" | zwischen den Flaschenhalter Montagelöchern ist eine kleine längliche Delle | Gabelkonus wurde runtergefeilt auf 26.1 - 26.2 mm | siehe Bilder!
Zustand: technisch okey / optischer Zustand: siehe Fotos
Condition: technically okey / visual condition: see pictures